In 2000, our
monochrome CRT
upgraded with a color CRT
supporting CGA, EGA and
eventually VGA graphics modes.
At COMDEX 1987, MilitaryLCDPro introduced
first flat panel portable PC. It had
a baby-AT motherboard, back-lit
super-twisted monochrome LCD
display. It represented MilitaryLCDPro
successful effort in reducing.
The Signature II Series line of displays combines all of today’s cutting edge technology with ease of use. This completely re-designed product includes our famous dim to red technology on all inputs. A slim case design so today’s mariner can put a larger display into a more confined helm space and a dial for detailed dimming and brightness settings on the fly. A combination of 6 inputs 1 DVI, 2 VGA and 3 Composites on the available 12.0”, 15.0”, and 19.0”, puts the Signature II Series at the top of the pack for its industry sector.
Product Features
Sunlight Readable - Ready for all environments
Waterproof - Built to Stringent IP67 Standards
Bonded Glass - Optically Enhanced for clarity
Multiple Inputs - DVI, VGA, NTSC, PAL, SEC AM
Deep Dimming - 0 to 100% via “Potentiometer”
Superior Image - Scalable resolution up to SXGA
LED Backlighting - Reduces Power draw at all levels
Extended Temperature Range - on 12” & 15” Models
Picture in Picture - Designed to display ALL inputs
Product specification
Electrical Description
Display Characteristics:
Type:
12.1” Active Matrix TFT
Dot Number:
1024 x 768 Pixels
Dot Pitch:
0.240mm
Response Time:
23ms Average– Typical
Contrast Ratio:
700:1 Min.
Brightness / Light Intensity:
750 cd/m˛ (Enhanced for Sunlight Readability)
Viewing Angles (at CR>10):
80o Left/Right, 80o Up/ Down
Backlight Life:
25,000 Hours- Typical
Colour Depth:
16.7 Million (Depending on Graphics Card)
Dimming Circuit:
Range:
Full Brightness to Black with “Dim to Red” at any level
DVI-I Input:
Digital Interface:
DVI 1.0 Compatible Interface
85Hz Operation
Analog RGB Input:
Analog Interface:
85 Hz Maximum Analog Bandwidth
0.5V to 1.0V Analog Input Range
Sync-on-Green (-ve) 0.3V
Composite Video Input:
Composite Interface:
PAL, NTSC & SECAM with ‘Picture In
Picture’ PIP Facility
Synchronisation Range:
Horizontal Scan:
31.469-79.976 kHz*
Vertical Scan:
56-87 Hz*
*Depending on resolution
Resolutions:
VESA Support for:
1280 X 1024 SXGA
1024 x 768 XGA*
800 x 600 SVGA
640 x 480 VGA
*Recommended for optimised resolution...
Active Display Area:
Active Display Area:
245.76 mm x 184.32 mm
Input Voltage:
DC Input:
12.1V DC Regulated
Via External Power Supply - Refer to ordering codes...
Power Consumption:
1.25 A (15 W) Max.
Environmental:
*Operating Temp:
-4 to +158°F / -20 to +70°C
Storage Temp:
-13 to +167°F / -25 to +75 °C
Operating Humidity:
30% to 90% (Non-Condensing)
Storage Humidity:
10% to 90% (Non-Condensing)
Shock:
10g, 11msec ˝ Sine Wave
Vibration:
+/-1mm, 2 to 13Hz: 0.7g 13 to 100 Hz
*We DO NOT recommend routine operation @ extreme temperatures...
Mechanical Description
Construction:
Finish:
Black Fine Textured Semi Gloss Powder
Coat
Housing:
Preformed Aluminium
Sealing:
Waterproof NEMA 6 / IP67
Toughened Safety Glass :
Bonded, Contrast Enhancing, Optically
Coated and Polarized
Ventilation:
Convection
Mounting Style:
Surface (mm):
Surface Mounted w/1.275” (32.37)
Protruding and Fastened with 4 8-32
Mounting Studs
Panel Cut-Out Size (mm):
10.262” (260.66) W X
7.783” (197.70) H
Dimensions:
Display (mm):
12.963” (329.26) W x 9.080” (230.64) H x 3.200” (81.28) D
Weight:
Weight (kg):
10 lbs (4.6)
Input Connectors: (rated @ NEMA 6 / IP67)
2x RGB Signal:
2 15 Pin Male Circular Connectors
1x DVI Signal:
19 Pin Male Circular Connector
3x Composite Signal:
6 Pin Male Circular Connector
Power:
2 Pin Male Circular Connector
Menu Controls:
Via Front Mounted Buttons:
OSD Picture Features:
Size, Position, Colour and Input Selection
Brightness Control:
Front Mounted Potentiometer
Approvals / Warranty
Compliance:
CE: IEC60945 / CISPR22 / EN 55022
FCC: Part 15 Section 15.109
Limited Warranty:
3 Year
Ordering Codes
Standard Configuration:
12.1” Daylight Display:
26-1210
Please specify an external power supply from list below...