In 2000, our
monochrome CRT
upgraded with a color CRT
supporting CGA, EGA and
eventually VGA graphics modes.
At COMDEX 1987, MilitaryLCDPro introduced
first flat panel portable PC. It had
a baby-AT motherboard, back-lit
super-twisted monochrome LCD
display. It represented MilitaryLCDPro
successful effort in reducing.
AMD 12.1" IP65/NEMA4 Panel Mount LCD with Dual Ethernet FanLess PC Computer SBC. Model (WPMC1210-IPL1-A-DL)
■ 12.1" TFT LCD Solution
■ AMD LX800 500 MHz CPU, Fanless Design
■ Integrated LVDS/ VGA function
■ 1 x DDR SODIMM, max. 1GB
■ Dual Fast Ethernet (Optional Giga Ethernet)
■ 1 x Mini PCI(Optional), 1 x Type I/II CF socket, 2 x SATA 1.0
■ 4 x COM, 4 x USB 2.0
■ Ultra Slim Profile: Less than 60 mm (2.36")in depth
System Specification
Form Factor
3.5"
Processor
AMD Geode LX-800 500MHz Processor
System Chipset
AMD CS5536 Companion Device
System Memory
1 x 200-pin SODIMM, max. 1GB (Default 256MB)
BIOS
Award 4Mbit
VGA Controller
On-board VGA/LCD Controller
VGA Memory
Shared memory, max.64MB
LCD Support
TFT LCD
Ethernet
Realtek RTL8110c Chipset
Audio
Realtek ALC203 AC97 Chipset + AC97 codec
IDE
1 x IDE (UDMA 33/66/100)
SATA
2 x SATA 1.0
Serial
3 x RS-232, 1 x RS-232/422/485*
USB
4 x USB
KB / Mouse Connector
1 x PS/2
Expansion Slots
1 x Mini PCI(Optional), 1 x Type I/II CF socket
DVD Optional
No
HDD
2.5 inch 40GB
OS Optional
Windows XP Professional / Embedded, Linux
Power Adapter
DC IN 12V or 19V
Environment
Environment & Dimensions
From Factor
3.5"
Temperature
Operating : 0 deg.C to 45 deg.C
Humiduty
30% to 90% non condensing
LCD Panel Specification
Viewable Size Image
12.1"
Active Display Area
246.0 (H) x 184.5 (V)
Pixel Pitch
0.3075 (H) x 0.3075 (V)
Pixels
800x600
Contrast Ratio
500:1 (typ.)
Display Color
262,144 (6bits/color)
Brightness
400 (typ.)
Viewing Angle
-70~70 (H); -50~60 (V)
Recommend Resolution
800x600@60Hz, 75Hz
Power source
AC110~240V,Universal, ±10%
Power Consumption
15W typical, normal operation
Power Management
VESA DPMS Compliant
Plug Play
VESA DDC 1/2B
Optional TouchScreen
Resistive
Note: All Specifications are subject to change without prior notice!
*If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.
