In 2000, our
monochrome CRT
upgraded with a color CRT
supporting CGA, EGA and
eventually VGA graphics modes.
At COMDEX 1987, MilitaryLCDPro introduced
first flat panel portable PC. It had
a baby-AT motherboard, back-lit
super-twisted monochrome LCD
display. It represented MilitaryLCDPro
successful effort in reducing.
15" Rugged Transflective Sun Light Readable Marine LCD Display 870 Nits. Optional Elo SAW TouchScreen Model:(WPM-MAR-1500A1)
15" , 1024 x 768, 550 nits, DVI, RGB, Composite, S-Video,PIP,Power On/Off, VR Brightness Knob, Power Mode Status LED, OSD, OSD Remote Control via RS-232,8V to 36 V DC to DC,Front Panel Sealed to IP65 / Rear IP54, 0 to +55 Deg Operational Temperature
:Dimming knob control backlight brightness from nearly 0% to 100%
Sunlight Readable
:Transflective film technology enhance visibility
Ruggedized IP65 Proof
Panel (flush) mount IP65 aluminum housing with powder coating design
(IP54 rear)
Wide Voltage Range Input
:8 to 36V DC to DC power input acceptable
Touchscreen
:High quality touchscreen / AR protection glass for option
Multiscan function
PIP(picture in picture) function and multi-video inputs
IP65 OSD front panel Design
:Ease of use front panel OSD control
Anti-shock and Vibration
:Enhanced shock and vibration resistance
Specifications
TFT Characteristics
Pixel Number
1024x768
Pixel Pitch(R&B)
0.297 (H) x 0.297 (V)
Contrast Ratio
500:1 (typ.)
Light Intensity
650 (typ.)
Viewable Angle
-70~70 (H); -50~70 (V)
Active Display Area
304.128 (H) x 228.096 (V)
Max Colors
16.2M (6bits+FRC)
Input Signals
RGB Signal
D-SUB 15P connector(female)
Composite Video
RCA phono plug
S-Video Signal
S-Video (SVHS) plug
DVI-D Signal
DVI-D input 24pin connector
DC Power Signal
Screw terminal block
AC Power Signal (Optional)
Std IEC Inlet
Touch Screen (Optional)
D-SUB 9P connector (female)
Remote via RS-232 (Optional)
D-SUB 9P connector (female)
User Controls
Power On/Off via front button
VR Brightness Knob Control
On Screen Display control(OSD)
OSD Remote Control via RS-232
Power Mode Status LED
Power Specification
Power Supply Options
8 to 36 V DC to DC power supply with terminal block. 90 to 265 V AC (optional)
Power Consumption
40 W typical, normal operation
Environmental Considerations
Operating Temperature
-10 deg.C to 55 deg.C
Humidity
5% to 95% (non condensing)
Anti-Vibration
5Hz~500Hz / 1Grms/3 Axis
Anti-Shock
15G, 11ms duration
Available Options
Mechanical Options
Panel (Flush) mount with IP65 (SAW touch for IP54)
Touch Screen Options
SAW, 5 Wire Resistive
AR Safety Glass Option
3mm Anti-reflective protection glass
VESA Mounting
Yes
Certification and Approvals
Certification
CE, FCC
Approvals
DNV Type Approval (Pending)
Outdoor Readability
Ambient light(nit)
10,000
30,000
80,000
Brightness gain (nit)
680
870
1,320
Reflectance(net)(%)
1.00%
0.98%
0.90%
Note
*Equivalent brightness under sunlight.
*Due to Panel material's deviation, different panel supplier will set different specific variance range to optical characteristics. The factors of time used, Lamp current, Ambient temperature will influence the optical measurements.
