In 2000, our
monochrome CRT
upgraded with a color CRT
supporting CGA, EGA and
eventually VGA graphics modes.
At COMDEX 1987, MilitaryLCDPro introduced
first flat panel portable PC. It had
a baby-AT motherboard, back-lit
super-twisted monochrome LCD
display. It represented MilitaryLCDPro
successful effort in reducing.
Intel 19" IP65/NEMA4 Panel Mount LCD w/ All-in-one PC Computer. Model (WPMCW1900-IPM1-I)
Intel® Pentium® M/Celeron® M up to 2.0GHz (Default Celeron® M 1.5GHz), 1 x 184-pin DDR DIMM, max.1GB (Default 256 MB), 1440x900, 300 nits, 850:1 contrast ratio w/ optional integrated touchscreen
.19" TFT 1440x900 LCD
.Intel® Pentium® M / Celeron® M Processor, up to 2 GHz
.1 x DIMM, max. 1GB DDR 200/266/333
.Integrated VGA, 64MB shared, CRT/LVDS
.Integrated Dual Realtek RTL8110SC Gigabit Ethernet
.1 x Type I/II CF socket(Optional), 1 x PCI, 1 x Mini PCI
.4 x COM (1xOptioinal), 6 x USB 2.0 (2xPin header)
.1 x Digital I/O (Pin header)
.Slim Profile: Only 69 mm (2.72") in depth
System Specification
Form Factor
Mini-ITX
Processor Socket
Socket 478
Processor
Intel® Pentium® M/Celeron® M up to 2.0GHz (Default Celeron® M 1.5GHz)
Front Side Bus
400 MHz
System Chipset
Intel® 855GME/ICH4
System Memory
1 x 184-pin DDR DIMM, max.1GB (Default 256 MB)
BIOS
Award 4Mbit
VGA Controller
Intel® 855GME integrated
VGA Memory
Shared memory, max.64MB
LCD Support
24-bit LVDS (Dual channel)
Ethernet
Dual Realtek RTL81110SC Gigabit Ethernet
Audio
Built-in audio + AC97 codec
IDE
2 x IDE (UDMA33/66/100)
I/O Chipset
W83627EHG
Serial
3 x RS-232(one is Optional), 1 x RS-232/422/485*
USB
6 x USB ( 4 x USB on backside I/O)
KB / Mouse Connector
2 x PS/2
Watchdog Timer
256 Levels
Expansion Slots
1 x Type I/II CF socket(Optional),1 x PCI, 1 x Mini PCI
DVD Optional
Standard Slim DVD ROM/Combo/Dual (Optional)
HDD
3.5 inch 80GB
FDD Optional
3.5" 1.44MB FDD+7 in 1 Card Reader
OS Optional
Windows XP Professional / Embedded, Linux
Power Adapter
DC IN 12V
Other
1 x Digital I/O (Pin header)(4 x input,4 x output)
Note: All Specifications are subject to change without prior notice!
*If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.