In 2000, our
monochrome CRT
upgraded with a color CRT
supporting CGA, EGA and
eventually VGA graphics modes.
At COMDEX 1987, MilitaryLCDPro introduced
first flat panel portable PC. It had
a baby-AT motherboard, back-lit
super-twisted monochrome LCD
display. It represented MilitaryLCDPro
successful effort in reducing.
AMD 8.4" Rugged Transflective NEMA4 Sun Light Readable Marine LCD 490 Nits Display with Fanless PC Computer. Optional TouchScreen (Model: WMARC840T1-A)
Dimming knob control backlight brightness from nearly 0% to 100%
Transflective film technology enhance visibility
Panel (flush) mount IP65 aluminum housing with powder coating design (IP54 rear)
8 to 36V DC to DC power input acceptable
High quality touchscreen / AR protection glass for option
Ease of use front panel OSD control
Enhanced shock and vibration resistance
TFT Characteristics
Pixel Number
800x600
Pixel Pitch (RGB)
0.213 (H) x 0.213 (V)
Contrast Ratio
250:1(typ.)
Light Intensity
490 (typ.)**
Viewing Angles
100 (H); 90 (V)
Active Display Area
170.4 (H) x 127.8 (V)
Max Colors
262,144 (6bits/color)
SBC Specifications
Processor
AMD Geode LX-800 500MHz CPU
BIOS
Award 4Mbit Flash
System Chipset
AMD CS5536 Companion Device
Memory Slot
1 x SODIMM, Default 512MB
Graphic Chipset
AMD Geode LX800 Integrated (64MB shared)
IDE
1 x IDE(UDMA33)
IDE
1 x Type I/II CF Socket
KB / Mouse
1 x PS/2
Ethernet
1x RJ-45(Realtek RTL8110s 10/100 Mbps)
VGA
1x VGA Connector
Audio
Build in AC97 Codec
USB Ports
4 x USB2.0
Serial Ports
3 x RS232, 1 x RS232/422/485*
Hard Drive
2.5" 40GB HDD
Expansion slot
1x Mini PCI
Power Specifications
Power Supply Options
8 to 36 V DC to DC power supply with terminal block
Power Consumption
25 W typical, normal operation
Environmental Considerations
Operating Temperature
-10 to 55 deg.C (-20 to 60 deg.C for optional heating)
Operating Humidity
5% to 95% (non condensing)
Anti-Vibration
5Hz~500Hz / 1Grms/3 Axis
Anti Shock
15G, 11ms duraiton
Input / Output Connectors
Ethernet LAN
1 x RJ45-10/100 Mbps
Keyboard / Mouse
1 x PS/2
COM
2 x RS232, 1 x RS232/422/485*
USB
2 x USB Type-A receptable
RGB Out
1 x VGA 15P DSUB (female)
Compact Flash Socket
1 x Type I/II CF Socket (Not support Pull and Plug.)
Power Input
1 x DC Terninal block
Available Options
Mechanical Options
Panel (Flush) mount with IP65 (SAW touch for IP54)
Touch Screen Options
SAW, 5 Wire Resistive
AR Safety Glass Option
3mm Anti-reflective protection glass
VESA Mounting
Yes
Certification and Approvals
Certification
CE, FCC
Approvals
DNV Type Approval (Pending)
*Due to Panel material's deviation, different panel supplier will set different specific variance range to optical characteristics. The factors of time used, Lamp current, Ambient temperature will influence the optical measurements.
*If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.
**pls refer to Transflective product line for further brightness information
