Sunlight Readable 20.1" NEMA4/IP65 Rugged Panel Mount LCD Monitor (Model: WPMH2010-IPA2)

Call Us (Toll Free):
1-888-483-2418
Hrs: 6am to 6pm PST

Site Map | View Cart

Company Profile

In 2000, our
monochrome CRT
upgraded with a color CRT
supporting CGA, EGA and
eventually VGA graphics modes.
At COMDEX 1987, MilitaryLCDPro introduced
first flat panel portable PC. It had
a baby-AT motherboard, back-lit
super-twisted monochrome LCD
display. It represented MilitaryLCDPro
successful effort in reducing.

Sunlight Readable 20.1" NEMA4/IP65 Rugged Panel Mount LCD Monitor (Model: WPMH2010-IPA2)

Home » Our Products » Panel Mount NEMA4 Monitor » 20" Rugged LCD Monitor » Sunlight Readable 20.1" NEMA4/IP65 Rugged Panel Mount LCD Monitor (Model: WPMH2010-IPA2)

ZOOM

Availability: Usually ships in 4-6 weeks

Data Sheet

Product Overview

Specification
Model Name	WPMH2010-IPA2
Viewable Size lmage	20.1"
Active Display Area (mm)	408.0(H)x306.0(V)
Pixel Pitch (mm)	0.51(H)x0.51(V)
Number of Pixels	1600x1200(UXGA)
Contrast Ratio	700:1
Display Color	16.7M(8bit/color)
Brightness (CD/m^2)	312.5
Viewing Angle (CR >=10)	-85~85H);-85~85(V)
Synchronization Range Horizontal / Vertical	31.5~80KHz/56~75Hz
Recommended Resolution	1600x1200@60Hz
Signal Connector	15 pin D-sub
Power Soruce	AC 100~~240 V,Universal
Power Consumption	60 W typical, normal operation
Power Management	VESA DPMS Compliant
Plug & Play	VESA DDC 1/2B
Video Input	S-Video,Composite
Optional DVI Input	Yes
Optional Touch Screen	SAW
Optional protection glass(refl ection rate<0.5%)	Anti-reflective glass
Operation Temperature	0��C~50��C

Outdoor Readability
Ambient light(nit)	Brightness measure angle	10,000	30,000	80,000
Brightness gain (BL0n)(nit)	35°	312.5	456	680
Reflectance(net)(%)		0.7%	0.68%	0.45%

Remarks:WOPH2010A2 series = VGA input only
WOPH2010A2AV series = VGA + Video input

* Equivalent brightness under sunlight.

* Due to Panel material's deviation, different panel supplier will set different specific variance range to optical characteristics. The factors of time used, Lamp current, Ambient temperature will influence the optical measurements.